Trouble getting the driver side ball joint back into the LCA.

[atikovi]

For some reason, the passenger side uses a tapered ball joint stud so it was no problem getting it back together. The driver side uses a large square shoulder stud and I'm having trouble getting it squarely into the control arm hole. Any suggestions?

Sponsored

 

[atikovi]

Used some silicone spray and twisted it with pliers to start it squarely in the hole. Then sucked it all the way in with the nut.

 

[GenXHendrixx]

Used some silicone spray and twisted it with pliers to start it squarely in the hole. Then sucked it all the way in with the nut.

AYYYYYOOOOOOOO

Sponsored