18x10 +39 fitment

[Solus]

Been wanting to run some 18x10 +39 on 255/35 tires. I'm currently running a 18x9.5 +37 on 255/35 with no issues at all, no fender rolling etc. Would I rub on 10's or have any issues? I'm hesitant to get them on if I have to roll or maybe do some cambering on them.

Sponsored

 

[GoldClass]

Base on the numbers provided, the tire will poke 4.35mm nearer to the fender. Do you have this 4.35mm(~5mm) clearance bet. the tire and the fender?

Just curious....from 9.5” to 10” is not very significant, what make you wanting for 10”?

 

[Solus]

Base on the numbers provided, the tire will poke 4.35mm nearer to the fender. Do you have this 4.35mm(~5mm) clearance bet. the tire and the fender?

Just curious....from 9.5” to 10” is not very significant, what make you wanting for 10”?

Wheels came in, but it was 10" instead of 9.5. I contacted the sales rep and the guys at the warehouse messed up. I risked it anyways. They fit, without any issues.

 

[AjHawk]

18x11 +39 Front
18x11 +44 Rear
No rubbing, no rolling
You’ll be fine on the 10’s

 

[GoldClass]

Wheels came in, but it was 10" instead of 9.5. I contacted the sales rep and the guys at the warehouse messed up. I risked it anyways. They fit, without any issues.

I see. That’s a ‘good deal’! Enjoy your new wheel.

 

[GoldClass]

18x11 +39 Front
18x11 +44 Rear
No rubbing, no rolling
You’ll be fine on the 10’s

I believe this is for R and will not fit OP
hatch model.

 

[Solus]

I believe this is for R and will not fit OP
hatch model.

I have 18x10 +39 rn on my civic si coupe it fits without any rubbing, lowered on hks coils to the max which isn't low as d2 springs

 

[Shushi]

Wheels came in, but it was 10" instead of 9.5. I contacted the sales rep and the guys at the warehouse messed up. I risked it anyways. They fit, without any issues.

do you have any pics? i’m running into your same situation

Sponsored