Anyone know what sensor this is?

[D.AucoinFK7]

Put a new engine in my car. Swapped harness over before putting it in and thought I had plugged everything in. Obviously at this point I’m realizing that I haven’t. The connector has a small mounting tab on it, and it comes out near my injector harness. Any idea what sensor it’s for and where it plugs in??

Sponsored

 

[bushfreakz]

is there a sensor on the bottom of the intake manifold there?

 

[D.AucoinFK7]

I don’t think so, but I’ll double check

 

[D.AucoinFK7]

is there a sensor on the bottom of the intake manifold there?

Nothing on the bottom of the intake manifold or throttle body

 

[bushfreakz]

trying to look through some docs...

 

[Austin@Wunderladen Racing]

That looks a lot like the neutral position sensor connector on the back of the transmission. It's behind the shift selector kind of under the shifter cable bracket.

 

[D.AucoinFK7]

trying to look through some docs...

Going to compare this to what I have done in my car. The harness has a few 4 pin connectors that are similar.

That looks a lot like the neutral position sensor connector on the back of the transmission. It's behind the shift selector kind of under the shifter cable bracket.

It would reach there. I’ll pull the shift cables tonight and see if it plugs in there.

 

[bushfreakz]

I think Austin is right! This is on my 22 Si but from what i can see the connector looks like a 4 wire square (old O2 sensor style) and the mounting bracket looks to be identical also.. video below also

 

[D.AucoinFK7]

I think Austin is right! This is on my 22 Si but from what i can see the connector looks like a 4 wire square (old O2 sensor style) and the mounting bracket looks to be identical also.. video below also

Going out in the garage to check shortly, I’ll let you guys know

 

[D.AucoinFK7]

That was the one, thanks fellas!

Sponsored